Get all of this for £169.99 ex VAT for a limited time:

• 15mm Monument Masters Standard Copper Pipe Bender
• 22mm Monument Masters Standard Copper Pipe Bender
• 15mm & 22mm Pipe Bender Extension Handles
• 15mm & 22mm Monument Autocut® Twin Pack
• Monument Autobrush 15mm & 22mm Twin Pack

---

Monument Masters Standard Copper Pipe Benders

The Monument Masters 15mm Standard Copper Pipe Bender is a single-sized pipe bender designed for 15mm copper pipe (0.7mm wall).

The Monument Masters 22mm Standard Copper Pipe Bender is a single-sized pipe bender designed for 22mm copper pipe (0.9mm wall).

Both have several advantages over a traditional combi pipe bender:

• Less fiddly – with the integrated hook and nylon guide, the hook stop won’t flop from side to side and the guide(s) won’t fall out.
• Lightweight – the 15mm weighs 1.5kg compared to a combi at 4kg, while the 22mm weighs 3.1kg compared to a combi at 4kg.
• Less cumbersome – you’re only using a bender for the pipe size being bent.
• Better sight lines – as the bend is in the same plane as the arms of the bender, it’s easier to line up by eye.
• More compact than a combi – the 15mm has an arm length of approximately 40cm, compared to a combi arm length of around 65cm.

---

Monument Extension Handles

The included extension handles are designed to increase leverage when bending both 15mm and 22mm copper pipe.

These short-threaded extension handles fit both the 15mm and 22mm versions. One or more extension handles can be added for additional leverage.

---

Monument Autocut® Copper Pipe Cutters

The Monument Autocut® Twin Pack includes a 1715C (15mm) and 1722Y (22mm) pipe cutter, both featuring a compact aluminium body - ideal for working in confined spaces.

• Cuts in one direction for a clean, consistent edge that helps prevent leaks and uneven joints
• Size-specific design ensures you're always cutting to the exact pipe diameter
• Not for use on stainless steel

---

Monument Autobrush 15mm & 22mm Twin Pack

The Monument Autobrush (3643W) is a copper pipe end cleaner for both 15mm and 22mm pipe. Use it by hand or chuck it in a power tool for faster prep before soldering.

• 30mm brush depth, suitable for both soldered and press fit fittings
• Compatible with 3/8in. Female Square Drive
• Quick-release 1/4in. Hex Shank with 3/8in. Male Square Socket Drive
• Zinc die-cast body
• Recommended speed: 50–100rpm in a drill or impact driver

Our shipping charges for UK / Northern Ireland are as follows:

Orders less than £60 (ex VAT):

• £6.60 Flat Rate Shipping

Orders over £60 (ex VAT):

• Free Standard Delivery

We expect your items to be delivered 3-5 days after you've placed your order.

Please see our returns policy here.